2017:
Osteochondral Allograft Donor-Host Matching by the Femoral Condyle Radius of Curvature.
2016:
Quantifying and Predicting Surgeon Work Input in Primary vs Revision Total Hip Arthroplasty.
Quantifying and Predicting Surgeon Work Effort for Primary and Revision Total Knee Arthroplasty
What Is the Optimal Minimum Penetration Depth for “All-Inside” Meniscal Repairs?
2015:
Tibial Stems in Revision Total Knee Arthroplasty: Is There an Anatomic Conflict?
2014:
Hip Arthroplasty after Intramedullary Hip Screw Fixation: A Perioperative Evaluation
Predicting wear and blood metal ion levels in metal‐on‐metal hip resurfacing
2013:
Biomechanical Evaluation of a New Matrix- Mandible Plating System on Cadaver Mandibles
Effect of design on the initial stability of press-fit cups in the presence of acetabular rim defects: experimental evaluation of the effect of adding circumferential fins
The effect on external rotation of an anchor placed anterior to the biceps in type 2 SLAP repairs in a cadaveric throwing model
Total knee arthroplasty using anatomic alignment can produce mid-flexion laxity
What is the Minimum Depth of Bone Resection Necessary for Treatment of CAM FAI?.
2012:
Constrained cups appear incapable of meeting the demands of revision THA
Development of a New Knee Society Scoring System
The New Knee Society Scoring System
The optimal skin incision for minimally invasive total hip arthroplasty performed via the anterolateral approach.
https://www.ncbi.nlm.nih.gov/pubmed/22153946
Which Steps Do Trainees Find Most Difficult in Performing Knee Replacement?
2011:
Development of a mandibular motion simulator for total joint replacement
The impact of ulnar collateral ligament tear and reconstruction on contact pressures in the lateral compartment of the elbow
2010:
Ethnicity Affects all Knee Arthroplasty
Influence of Gender on Age of Treatment with TKA and Functional Outcome
Minimizing Electromagnetic Interference from Surgical Instruments on Electromagnetic Surgical Navigation.
2009:
Screw versus Plate Fixation of Proximal First Metatarsal Crescentic Osteotomy
2008:
Security of Knots Tied WithEthibond, Fiberwire, Orthocord, or Ultrabraid
2007:
A Computerized Bioskills System for Surgical Skills Training in Total Knee Replacement
Fiber Bragg grating displacement sensor for movement measurement of tendons and ligaments
Making Minimally Invasive THR Safe: Conclusions FromBiomechanical Simulation And Analysis
2006:
Celecoxib Does Not Affect Osteointegration of Cementless Total Hip Stems
Cracking and Impingement in Ultra-High-Molecular-Weight Polyethylene Acetabular Liners
2005:
Backside Wear of Polyethylene Tibial Inserts: Mechanism and Magnitude of Material Loss
Surface Damage Of Patellar Components Used In Total Knee Arthroplasty
2004:
A Biomechanical Comparison of Repair Techniques for Type II SLAP Lesions
Cyclic Testing of Arthroscopic Knot Security
Factors Affecting the Severity of Backside Wear of Modular Tibial Inserts
The Optimal Strategy for Stable Tibial Fixation in Revision Total Knee Arthroplasty
Validation of a System for Automated Measurement of Knee Laxity: Brief Report
2003:
A Method for Testing Compressive Properties of Single Proteoglycan Aggregates
Computer Simulation: How Can it Help the Surgeon Optimize Implant Position?
Extra-articular Abrasive Wear in Cemented and Cementless Total Knee Arthroplasty
2002:
A Biomechanical Analysis of Meniscal Repair Techniques
Components of Laxity in Interference Fit Fixation of Quadrupled Hamstring Grafts
The Effect of Rotation on Radiographic Evaluation of the Tibiofibular Syndesmosis
The Effect of Strand Configuration on the Tensile Properties of Quadrupled Tendon Graft
2001:
Experimental and Computational Simulation of Total Hip Arthroplasty Dislocation
2000:
1999:
Cyclic Pull-out Strength of Hamstring Tendon Graft Fixation with Soft Tissue Interference Screws
Open Versus Closed Repair of the Achilles Tendon: An Experimental Animal Study
Quantitative Assessment of the Midcarpal Shift Test
1998:
A Biomechanical Study of Anterior Thoracolumbar Screw Fixation
A Comparison of Alternative Methods of Measuring Femoral Anteversion
The Performance of Proximal and Distal Centralizers in Modern Cemented Hip Arthroplasty
Pressurization and Centralization Enhance the Quality and Reproducibility of Cement Mantles
1997:
1996:
Factors Influencing Pressurization of the Femoral Canal during Cemented Total Hip Arthroplasty
Fixation Strength of Rotator Cuff Repairs and Suture Anchors and the Transosseous Suture Technique
1995:
Distal Stem Design and the Torsional Stability of Cementless Femoral Stems
Results of Operative Treatment of Idiopathic Scoliosis in Adults
1994:
Contributions of the Basic and Applied Sciences to Hip Replacement in Older Persons
Effect of Rotation on the Radiographic Appearance of the Femoral Canal
Posterior Cruciate Function Following Total Knee Arthroplasty A Biomechanical Study
1993:
The Effect of Femoral Component Position on the Kinematics of Total Knee Replacement
The Holding Strength of Cannulated Screws Compared with Solid Core Screws in Cortical and Cancellous Bone
1991:
Anterior and Posterior Internal Fixation of Vertical Shear Fractures of the Pelvis
Elution of Vancomycin, Daptomycin, and Amikacin from Acrylic Bone Cement
Use of a Hinged Silicone Prosthesis for Replacement Arthroplasty of the First Metatarsophalangeal Joint
1990:
Evaluation of an Electrogoniometric Instrument for Measurement of Laxity of the Knee
Metatarsal Osteotomy for Primary Metatarsalgia: Radiographic and Pedobarographic Study
1987:
A New Method for Radiography of Weight Bearing Metatarsal Heads
1988:
The Anatomic Basis of Femoral Component Design
1983
Penetration of Acrylic Bone Cements into Cancellous Bone
The Selection of Acrylic Bone Cements for Use in Joint Replacement
